After adding a new SAN Disks, VxVM unable to see the newly added devices.
Article ID: 100004520
Updated On:
Description
Error Message
# prtvtoc_c10t50000972081B0914d38s2
prtvtoc: /dev/rdsk/c10t50000972081B0914d38s2: Unable to read Disk geometry errno = 0x16
From format:
42. c10t50060482D5309768d38 /pci@1c,600000/QLGC,qla@1/fp@0,0/ssd@w50060482d5309768,26
From VxVM:
/dev/rdsk/c10t50000972081B0914d38s2 open failed: I/O error ioctl failed: Bad file number Vendor id : Product id : Revision : Serial Number :
Cause
Newly added devices not visible by OS nor Vxvm. The OS may not be seeing these devices correctly.
Resolution
After rebooting the system, the devices were then visible in the 'vxdisk list' output.
Issue/Introduction
Newly added SAN devices not seen by VxVM.
Was this article helpful?
Yes
No
Powered by
