Error V-218-40960-12 reported for Disks for Veritas Storage Foundation
book
Article ID: 100018837
calendar_today
Updated On:
Description
Issue
When disks in Veritas Storage Foundation are configured with MPIO, several events for device removal get logged.
Error Message
V-218-40960-12 - Device (%2,%3,%4,%5) is removed from array %6 of %7
Resolution
- Check to see if any HBA failure. Ignore if there is no failure and number of DSM path(s) is/are shown correctly. (sometimes, during system start up, system can initialize the disk, so device can go and come back to the system)
- Check for vxdmpadm logs for any errors regarding path failures
- Make sure the HBA drivers, storport/miniport drivers and MPIO drivers are updated. If using Veritas DMP/DSM ensure to have the latest DDI package installed
Issue/Introduction
When disks in Veritas Storage Foundation are configured with MPIO, several events for device removal get logged.
Error Message
V-218-40960-12 - Device (%2,%3,%4,%5) is removed from array %6 of %7
Solution
- Check to see if any HBA failure. Ignore if there is no failure and number of DSM path(s) is/are shown correctly. (sometimes, during system start up, system can initialize the disk, so device can go and come back to the system)
- Check for vxdmpadm logs for any errors regarding path failures
- Make sure the HBA drivers, storport/miniport drivers and MPIO drivers are updated. If using Veritas DMP/DSM ensure to have the latest DDI package installed
Was this article helpful?
thumb_up
Yes
thumb_down
No