vcs unable to import diskgroup in cvm environment
Article ID: 100020789
Updated On:
Resolution
vcs unable to import diskgroup cvm environment
Error Code / Messages
engine_A.log -
VCS WARNING V-16-10001-1016 (sys1)
DiskGroup:data_dg:online:vxdg import (clear flag) failed.
VCS ERROR V-16-10001-1003 (sys1)
DiskGroup:data_dg:online:** ERROR: vxdg import (force) failed on
Disk Group dir_dg1
/var/adm/message -
Apr 1 00:23:48 sys1 vxvm:vxconfigd: [ID 702911 daemon.notice] V-5-1-11401 dir_dg1: dg import with I/O fence enabled
Apr 1 00:23:48 sys1 vxvm:vxconfigd: [ID 702911 daemon.error] V-5-1-8327 vold_pgr_register: /dev/vx/rdmp/EMC0_12s2: register failed:err:305 Make sure the disk supports SCSI-3 PR.
Apr 1 00:23:48 sys1 vxvm:vxconfigd: [ID 702911 daemon.error] V-5-1-8327 vold_pgr_register: /dev/vx/rdmp/EMC0_17s2: register failed:err:305 Make sure the disk supports SCSI-3 PR.
Apr 1 00:23:48 sys1 Had[28460]: [ID 702911 daemon.notice] VCS ERROR V-16-1-1004 (sys1) DiskGroup:data_dg:online:** ERROR: vxdg import failed on Disk Group dir_dg1 after vxdctl enable
Problem Description -
In cvm/cfs environment, if fencing being used for e.g. UseFence = SCSI3 in main.cf file, then the globally it will try to import DiskGroup with keys
/var/adm/messages complains about the support for SCSI-3 PR
Problem Description -
SCSI-3 PR flag not enabled to the disks
Solution -
Enable SCSI-3 PR flag
Issue/Introduction
vcs unable to import diskgroup in cvm environment
Was this article helpful?
Yes
No
Powered by
