ERROR V-5-1-10128 Configuration daemon error 441
Article ID: 100021542
Updated On:
Resolution
This error can occur when performing various operations. Two are discussed here.
1. Attempting to stop a volume, both by using the
vxvol command and by offlining the VCS service group/resource (Mount resource)VxVM vxvol ERROR V-5-1-10128 Configuration daemon error 441 2. Attempting to upgrade disk group version
bash-3.00# vxdg upgrade snfs04a VxVM vxdg ERROR V-5-1-2356 Disk group snfs04a: upgrade failed: Configuration daemonerror 441 Viewing the private region in the first example stopping volume) shows:
#vxprivutil dumpconfig |vxprint -D - -ht v xatvol - DISABLED CLEAN 2027008 SELECT- fsgen pl vxatvol-01 vxatvol DISABLED CLEAN 2027008 CONCAT- RW sd vxatdg01-01 vxatvol-01 vxatdg01 0 2027008 0- DIS This information does not match the current status. Assuming the volume is operational vxprint shows:
v vxatvol - ENABLED ACTIVE 2027008 SELECT- fsgen pl vxatvol-01 vxatvol ENABLED ACTIVE 2027008 CONCAT- RW sd vxatdg01-01 vxatvol-01 vxatdg01 0 2027008 0- ENA Information contained in the private region (Volume Manager header) held in kernel memory is different than the private region on the disk(s) of the diskgroup.
Two different solutions are provided.
vxdg flush If successful, this command writes the kernel memory to the hard disk(s) to avoid unmounting the volumes and deporting the diskgroup. Otherwise, unmount all volumes in the affected diskgroups and deport and reimport it.
vxdg deport vxdg import This condition can presumably occur in any version of Volume Manager in any supported Operating System.
Issue/Introduction
ERROR V-5-1-10128 Configuration daemon error 441
Was this article helpful?
Yes
No
Powered by
