VCS CPI installer for Linux fails with message "CPI ERROR V-9-0-0 WRONG config!" when USB NIC is plugged in.
Article ID: 100025876
Updated On:
Description
Error Message
CPI ERROR V-9-0-0 WRONG config! NIC with MAC address e6:1f:13:xx:xx:xx has name usb0, but config file says
Cause
Defect in VCS CPI Installer script. Also, VCS does not support USB NIC at this time but CPI installer would abort when USB NIC is plugged in.
Resolution
Customer is not using USB NIC and not requesting for support of USB NIC with VCS so workaround is to unplug the USB NIC before running CPI installer. For a permanent solution, please install CPI hot-fix which can be downloaded from: https://sort.Veritas.com/patch/detail/5912
Applies To
IBM Hardware with USB NIC.
Packages
VRTSgab-5.0.40.00-MP4_SLES10
VRTSvcs-5.0.40.00-MP4_SLES10
VRTSvxvm-5.0.40.00-MP4_SLES10
VRTSllt-5.0.40.00-MP4_SLES10
ifconfig usb0
usb0 Link encap:Ethernet HWaddr E6:1F:13:XX:XX:XX
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Issue/Introduction
