Installation of Storage Foundation 6.0 and 6.0.1 fails due to missing rpms

book

Article ID: 100027676

calendar_today

Updated On:

Description

Error Message

CPI ERROR V-9-30-2225 The following required OS rpms (or higher version) were not
found on system1:
        nss-softokn-freebl-3.12.9-3.el6.i686 glibc-2.12-1.25.el6.i686
pam-1.1.1-8.el6.i686 libstdc++-4.4.5-6.el6.i686 libgcc-4.4.5-6.el6.i686
 
 

Cause

CPI installer recognizes the higher version of required rpms.

However, in this case, the required rpms for [rpmname]-[version].i686' (.i686 extension) were missing on the system. Irrespective of whether the platform is x86_64 or i686, SF 6.0 (and above) requires certain required OS rpms for both platforms, i.e., x86_64 and i686 to be installed.
 
        "glibc"  =>  "glibc-2.12-1.25.el6.i686 glibc-2.12-1.25.el6.x86_64",
        "libgcc"  =>  "libgcc-4.4.5-6.el6.i686 libgcc-4.4.5-6.el6.x86_64",
        "libstdc++"  =>  "libstdc++-4.4.5-6.el6.i686 libstdc++-4.4.5-6.el6.x86_64",
        "nss-softokn-freebl(x86-32)"  =>  "nss-softokn-freebl-3.12.9-3.el6.i686",

 

Resolution

These libraries are maintained by Red Hat which has other libraries associated. 

For installing the Storage Foundation required libraries

 

1) Install the following rpm with rpm -ivh command

2) Configure the Yum server and install 

 

 

 


Applies To

RedHat Enterprise Level (RHEL) 6

Storage Foundation 6.0, 6.0.1

Issue/Introduction

Installation of Storage Foundation 6.0 and 6.0.1 fails due to missing rpms. When performing a preinstall check (installer -precheck) for Storage Foundation (SF) 6.0 / 6.0.1 on RedHat Linux 6.2 / 6.3 release, it complains about the required operating system (OS) rpms not being installed, despite that the latest release of rpms have been installed on the system.
 
Powered by Wolken Software