SLES 16 release has eliminated support for VTOC-formatted disks. Because of this OS-level change, if there are plans to upgrade systems from SLES 15 to SLES 16 with InfoScale, it is necessary to first convert all the affected disks from VTOC to GPT before completing the OS migration.
Confirm that the InfoScale deployment is currently running an older InfoScale version such as 9.1 on SLES 15.
Identify whether any disks in the cluster use VTOC or non-GPT labels. Use the vxmediadisc utility (/etc/vx/diag.d/vxmediadisc -p <disk path such as /dev/sdc>) to get the disk data.
Plan a maintenance window for a process that includes the InfoScale upgrade, disk conversion, OS upgrade, reboot, and a package refresh.
Ensure to understand the process flow. The sequence of these steps matters:
Ensure to take backups of the disk labels and the cluster configuration before the disk conversion.
Upgrade InfoScale 9.2 on SLES 15.
Convert the VTOC disks to GPT first, and then perform the SLES 16 OS upgrade.
Upgrade to InfoScale 9.2 on SLES 16 after the OS migration and reboot.
Before starting the upgrade, take a backup of the following:
Disk VTOC label metadata for each affected disk
VCS configuration: (/etc/VRTSvcs/conf/config/main.cf)
Disk group configuration using /opt/VRTS/bin/vxconfigbackup
Any other environment-specific configuration files required for recovery
Do not skip the disk label backup. The disk backup steps must be completed before running vxdisk convertgpt <disk>. These backups provide a fallback path if the conversion fails for some reason and there is a need to revert the configuration to the earlier state.
Perform the following steps on a system running an older qualified InfoScale release, for example InfoScale 9.1, on SLES 15 SP7. The examples below use /dev/sdc . Replace the device path with the correct disk for your environment.
Back up sectors 0 through 256. This captures the VTOC labels, VxVM ID blocks, and primary PRIVHEAD.
dd if=/dev/sdc of=/tmp/sdc_head.img bs=512 count=257
Back up sector 496. This captures the alternate PRIVHEAD.
dd if=/dev/sdc of=/tmp/sdc_altphi.img bs=512 skip=496 count=1
Back up the last 33 sectors of the disk. This preserves the original end-of-disk region before the backup GPT is written there.
SECTORS=$(blockdev --getsz /dev/sdc)
dd if=/dev/sdc of=/tmp/sdc_tail.img bs=512 skip=$((SECTORS - 33)) count=33
Verify that the backup files exist and that their sizes are correct.
ls -l /tmp/sdc_head.img
ls -l /tmp/sdc_altphi.img
ls -l /tmp/sdc_tail.img
/tmp/sdc_head.img should be 131584 bytes (257 * 512)
/tmp/sdc_altphi.img should be 512 bytes
/tmp/sdc_tail.img should be 16896 bytes (33 * 512)
Back up all the disk group configuration data.
/etc/vx/bin/vxconfigbackup [-f] [-l directoryname]
Back up the VCS configuration file (/etc/VRTSvcs/conf/config/main.cf), other custom agents, and LLT and GAB configuration files.
haconf -dump -makero
hasnap -backup -f /tmp/vcs_backup.zip -n -m “Pre-upgrade backup”
Start with an older qualified InfoScale release, for example InfoScale 9.1, on SLES 15 SP7.
Back up all required configuration and disk metadata:
Back up the disk VTOC labels for each affected disk and the disk group configuration as per the steps mentioned in the Disk label backup section above.
Back up the VCS configuration file (/etc/VRTSvcs/conf/config/main.cf) as per the steps mentioned in the VCS cluster configuration backup section above.
Back up any additional files needed by your environment.
Upgrade InfoScale to version 9.2 on SLES 15 using the InfoScale installer (DVD or tarball) for SLES 15.
Use either a full upgrade or a rolling upgrade, as appropriate for the environment.
Ensure all disk groups are in the imported state, then convert every affected VTOC disk to GPT.
Run the following command:
vxdisk convertgpt <disk>
If vxdisk convertgpt fails, review the vxconfigd log, correct the reported issue, and retry the conversion:# cat /etc/vx/log/vxconfigd.log
5. Verify that no disks in the cluster remain VTOC-labeled.
Use the vxmediadisc utility to confirm that conversion is complete:
/etc/vx/diag.d/vxmediadisc -p <disk path such as /dev/sdc>
Sample output of disk /dev/sdc ; the Partition Table Type parameter displays the disk type as GPT.
# /etc/vx/diag.d/vxmediadisc -p /dev/sdc
vxmediadisc: Disk /dev/sdc is partitioned.
Partition Table Contents
Revision: 1
Partition Table Type: GPT
Partition Table OStype: CDS
Number of partitions: 128
Number of used partitions: 1
Partition Numbers 0 - 1 are Empty
Partition Number 2:
Partition Entry Type: CDS
Partition Entry Tag: 0x0f (Private)
Partition Entry Start: 0x0000000000000030 (48)
Partition Entry Size: 0x0000000746afffaf (31250710447)
Partition Entry Name: symc_cdsdisk
Partition Numbers 3 - 127 are Empty
vxmediadisc: Media format for /dev/sdc = cdsdisk (VxVM)
vxmediadisc: /dev/sdc generated by = All Supported
vxmediadisc: /dev/sdc is a SCSI disk.
vxmediadisc: Number of sectors: 31250710528
vxmediadisc: Sector size: 512
vxmediadisc: Number of disk reads: 1
CDS ID Block Contents
Magic ID String: VxVMDISK
Checksum: 0x00000A9E
Structure Version: 0x00000002
Flags: 0x00000004 (IS_CDS)
Priv Offset (Sectors): 0x00000000000000D0 (208)
Fabricated Geometry :
tracks/cylinder: 1262
sectors/track: 378
cylinders: 65510
Upgrade the operating system from SLES 15 to SLES 16 by using the OS-recommended procedure.
Example commands may include:
zypper refresh
zypper patch
zypper install suse-migration-sle16-activation
Reboot the systems after the OS upgrade to SLES 16 completes.
Upgrade to InfoScale 9.2 using the CPI installer from the InfoScale release media (DVD or tarball) for SLES 16.
This step updates the InfoScale 9.2 SLES 15 RPMs to the corresponding SLES 16 RPMs.
Verify that all InfoScale objects are up and running normally after the upgrade completes.
Use this procedure only if there is a need to revert the disks to their original VTOC state. The examples below assume the backup files were created from /dev/sdc.
1. Restore sectors 0 through 256, including the original VTOC labels and primary PRIVHEAD.
dd if=/tmp/sdc_head.img of=/dev/sdc bs=512 count=257 conv=notrunc
2. Restore sector 496, including the original alternate PRIVHEAD.
dd if=/tmp/sdc_altphi.img of=/dev/sdc bs=512 seek=496 count=1 conv=notrunc
3. Restore the last 33 sectors to remove the backup GPT and restore the original end-of-disk data.
SECTORS=$(blockdev --getsz /dev/sdc)
dd if=/tmp/sdc_tail.img of=/dev/sdc bs=512 seek=$((SECTORS - 33)) count=33 conv=notrunc
4. Instruct the kernel to re-read the partition table.
blockdev --rereadpt /dev/sdc
5. Scan all the disks:
vxdisk scandisks
6. Verify that the disk labels are reverted to VTOC using the vxmediadisc utility.
/etc/vx/diag.d/vxmediadisc -p <disk path such as /dev/sdc>
Sample output for disk /dev/sdc; the Partition Table Type parameter displays the disk type as VTOC:
# /etc/vx/diag.d/vxmediadisc -p /dev/sdc
vxmediadisc: Disk /dev/sdc is partitioned.
Partition Table Contents
Revision: 1
Partition Table Type: Symantec CDS VTOC
Partition Table OStype: CDS
Number of partitions: 8
Number of used partitions: 2
Partition Numbers 0 - 1 are Empty
Partition Number 2:
Partition Entry Type: Symantec CDS
Partition Entry Flags: 0x01
Partition Entry Tag: 0x05 (Backup)
Partition Entry Start: 0x0000000000000000 (0)
Partition Entry Size: 0x00000000027ff970 (41941360)
Partition Numbers 3 - 6 are Empty
Partition Number 7:
Partition Entry Type: CDS
Partition Entry Flags: 0x01
Partition Entry Tag: 0x0f (Private)
Partition Entry Start: 0x0000000000000000 (0)
Partition Entry Size: 0x00000000027ff970 (41941360)
vxmediadisc: Media format for /dev/sdc = cdsdisk (VxVM)
vxmediadisc: /dev/sdc generated by = All Supported
vxmediadisc: /dev/sdc is a SCSI disk.
vxmediadisc: Number of sectors: 41943040
vxmediadisc: Sector size: 512
vxmediadisc: Number of disk reads: 1
CDS ID Block Contents
Magic ID String: VxVMDISK
Checksum: 0x00000A62
Structure Version: 0x00000002
Flags: 0x00000004 (IS_CDS)
Priv Offset (Sectors): 0x0000000000000100 (256)
VTOC Geometry :
tracks/cylinder: 16
sectors/track: 41
cylinders: 63937
Fabricated Geometry :
tracks/cylinder: 255
sectors/track: 189
cylinders: 870
This article describes how to upgrade from SLES 15 to SLES 16 when InfoScale 9.2 is part of the upgrade path. The key requirement is disk label conversion for systems that use Volume Table of Contents (VTOC) or other non-GPT disk labels.
Important: This procedure is required only for systems with VTOC or non-GPT labeled disks. If all disks are already GPT-labeled, follow the standard major OS upgrade documentation for SLES 15 to SLES 16 and the normal InfoScale upgrade process.
Feedback submitted!